Bowl

The ultimate 2-in-1 accessory, the Bowl serves as both a sight glass and BS&W bowl. Made of impact-resistant Tritan™, the Bowl is stronger than other drain port sight glasses, crystal clear and chemically resistant. The distinctive contour design allows for immediate visual inspection of the oil, along with early detection of potential contamination problems such as water and sediment. Providing a visual indication of wear debris while the machine is running, the Bowl's rare earth magnetic drain plug also protects machinery by attracting and drawing wear particles to the bottom, proactively preventing machine failure and enabling a thorough drain of contaminates.

• Customer Photos
• Specs
• Installation

• 

  Specifications
  Application: Drain ports
  Volume: 1.0 fl. oz.
  Threads: Varies (see table)
  Dimensions: Varies (see table)
  Shipping Weight: 12 oz. each
  Recommended Temperature: -40°F to 200°F (-40°C to 93°C)
  Recommended Pressure: 65 psi./4.5 bar
  Sampling/Drain Valves: Drain valve, spiral to open, turn to lock
  Materials: Bowl: High-impact Tritan™(a crystal-clear copolyester); Adapter: zinc-plated steel; Drain valve: brass; Magnet (optional): Strong neodymium rare earth magnet
  Outdoor Compatibility: UV-resistant to protect against long-term sun exposure
  Chemical Compatibility: Resistant to mineral and synthetic oils that are compatible with fluorocarbon elastomers (Viton™) and PMMA (acrylic) plastic
  View the Technical Specifications

  

  Description	Part Number	L	D	S	V
  3/8" NPT Magnetic	BOWL.038.MAG	3.7"	2.2"	2 1/8"	1.0 fl.oz.
  1/2" NPT Magnetic	BOWL.050.MAG	3.7"	2.2"	2 1/8"	1.0 fl.oz.
  3/4" NPT Magnetic	BOWL.075.MAG	3.7"	2.2"	2 1/8"	1.0 fl.oz.
  1.0" NPT Magnetic	BOWL.100.MAG	3.7"	2.0"	1 13/16"	1.0 fl.oz.
  1 1/2" NPT Magnetic	BOWL.150.MAG	3.0"	2.0"	1 13/16"	1.0 fl.oz.

• 1. Check and remove any debris from inside the Bowl.
  2. Remove protective red cap from the magnet on the Drain Valve.
  3. Apply thread sealer to all threads before installation.
  4. Use a 2-1/8€ wrench to tighten the Adapter into your drain port.
  5. Use a 9/16€ wrench to tighten the Drain Valve into the Bowl.
  6. Do not overtighten once the hex bottom out.
  Recommended Temp. Range
  -40°F to 200°F / -40°C to 93°C

  Max. Operating Pressure
  65 psi/4.48 bar
•